Innovating for a Greener Future: Steel Fiber Reinforcement as a Key to Low-Carbon Concrete Construction
Abstract
The construction industry in GCC experiences continuous challenges in achieving sustainability targets toward net zero emissions by 2030 in alignment with the universal sustainable development goals. Concrete structures specifically contribute to most upfront carbon dioxide emissions that resulted from the clinker production of ordinary cement which generates high amounts of carbon emissions and uses high rates of energy which is against the sustainable development initiatives to lower the energy consumption in GCC. Having concrete is weak in resisting tensile stresses, most concrete applications are reinforced with steel mesh, and the steel reinforcement has high environmental product declared values as the process of production is energy intensive. Steel fiber concrete is strongly introduced as a sustainable solution and alternative to the steel reinforcement in concrete. Its high ability to heal and control the cracks in concrete by enhancing the ductility of concrete. Considering its lower declared values of carbon emissions compared to the normal steel mesh, the steel fiber has positioned itself as a promising solution to decarbonize different applications such as residential slab on grades. Additionally, the hybrid effect of adding steel fiber with steel reinforcement as combined increases the tensile resistance of concrete lowering the required amount of basic steel reinforcement to control crack widths. Steel fiber also improves the shear resistance of concrete which significantly reduces the element thickness under high concentrations of loads giving more alternative to architectural intents , cutting cost of materials and lowering the upfront carbon emissions. This paper investigates the environmental impacts of using steel fiber in residential slab on grades presenting a case study of project (Expo the Valley) in UAE where the steel fiber Dramix® had been utilized to optimize the thickness of slab on grades and replaced the steel mesh saving significant levels of carbon dioxide emissions. The findings clearly demonstrate that steel fiber can significantly lower carbon dioxide emissions considering its effects in design optimization and its low Environmental Product Declared Values.
References
- ACI 318. (2025). Building Code Requirements for Structural Concrete.
- ACI 544. (2018). Guide for the design of steel fiber concrete.
- fib. (2010). fib Model Code for Concrete Structures.
- Eurocode 2: Design of Concrete Structures – EN 1992.A
Downloads
Similar Articles
- Rami Alsodi, Mufid Samarai, Machine Learning Approach for Optimization of Concrete Mixes with Supplementary Materials , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 2 (2024): Emirati Journal of Civil Engineering and Applications
- Sokrates Ioannou, Morsaleen Chowdhury, Ahmed Al-Qarawi, Patcy Paul, Amal Alghazo, Key durability characteristics of GGBS-cement kiln dust based concretes , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 1 (2024): Emirati Journal of Civil Engineering and Applications
- Dr. Anf H. Ziadat, Habtemichael Habtemariam, Abdulla Rashed, Abdulrahman Alaydaroos, Mohamed Alketbi, Saeed Alali, Recycling Covid-19 Personal Face Masks Used in Concrete , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 1 (2024): Emirati Journal of Civil Engineering and Applications
- Fayiz Amin, Hafiz Ahmad Waqas, Mehboob Alam, Alina Yousafzai, Khowllah Naeem, Nayab Khan, Michael Gerges, Muhammad Fawad, Strengthening of Reinforced Concrete Deep Beams with Large Openings Using Metal Plates , Emirati Journal of Civil Engineering and Applications: Vol. 1 No. 1 (2023): Emirati Journal of Civil Engineering and Applications
- Areej T. Almalkawi, Rami A. Hawileh, Hussam Safieh, Wenda Wu, Mohammed A. Al-Osta, Jamal A. Abdalla, Prediction of inelastic seismic performance of RC structures using machine learning algorithms , Emirati Journal of Civil Engineering and Applications: Vol. 3 No. 2 (2025): Emirati Journal of Civil Engineering and Applications
- Carine Abou Hammine, Marwan Alzaylaie, Warren Mckenzie, Omer Mughieda, Osama Mohamed, Experimental Study on Palm Fibers Effectiveness for Sustainable Geotechnical Works , Emirati Journal of Civil Engineering and Applications: Vol. 3 No. 1 (2025): Emirati Journal of Civil Engineering and Applications
- Morsaleen S. Chowdhury, AlWaleed R. M. AlHimali, Sokrates Ioannou, Developing greener concretes from spent bleaching earth and sugarcane bagasse ash , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 2 (2024): Emirati Journal of Civil Engineering and Applications
- Zia Ul Islam, Adil Khan, Haris Abdullah, Osama Wali, Muhammad Talha Raza, A Sustainable Model for Engineering Project - a Stakeholder’s Perspective , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 2 (2024): Emirati Journal of Civil Engineering and Applications
- Mahsa Malekazari, Perceptual Intelligence and Passive Energy Saving Strategies in Building Systems: Adaptive Frameworks for Sustainable Performance in Hot Climates , Emirati Journal of Civil Engineering and Applications: Vol. 4 No. 1 (2026): Emirati Journal of Civil Engineering and Applications
- Esraa Daouda, Overview of the Smart City initiatives and challenges in Middle East , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 2 (2024): Emirati Journal of Civil Engineering and Applications
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Osama Abu Daoud, Uttara Roy, Khaled Ksaibati, Modeling Severities of Gravel Road Crashes Using Random Parameters , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 2 (2024): Emirati Journal of Civil Engineering and Applications
- Jian-lan Zheng, Areej T. Almalkawi, Wenda Wu, Amal Th. Almalkawi, Effect of Fly Ash Replacement Content on the Autogenous Shrinkage of Self-Compacting Concrete. , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 1 (2024): Emirati Journal of Civil Engineering and Applications
- Morsaleen S. Chowdhury, AlWaleed R. M. AlHimali, Sokrates Ioannou, Developing greener concretes from spent bleaching earth and sugarcane bagasse ash , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 2 (2024): Emirati Journal of Civil Engineering and Applications
- Adil K. Tamimi, Ghanim Kashwani, Amr Hamam, Ismail Abu AlHaj, Yousef Himeidi, Bilal Ramadan, Building Information Modeling (BIM) for Energy Optimization in Green Buildings: A Case Study of a Residential Villa in the UAE , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 2 (2024): Emirati Journal of Civil Engineering and Applications
- Carine Abou Hammine, Marwan Alzaylaie, Warren Mckenzie, Omer Mughieda, Osama Mohamed, Experimental Study on Palm Fibers Effectiveness for Sustainable Geotechnical Works , Emirati Journal of Civil Engineering and Applications: Vol. 3 No. 1 (2025): Emirati Journal of Civil Engineering and Applications
- Kamyar Kamyab, Adil K. Al-Tamimi, Ghanim A. Kashwani, Evaluation of Lime Mortar and Conservation Techniques in Traditional Elements , Emirati Journal of Civil Engineering and Applications: Vol. 3 No. 2 (2025): Emirati Journal of Civil Engineering and Applications
- Areej T. Almalkawi, Rami A. Hawileh, Hussam Safieh, Wenda Wu, Mohammed A. Al-Osta, Jamal A. Abdalla, Prediction of inelastic seismic performance of RC structures using machine learning algorithms , Emirati Journal of Civil Engineering and Applications: Vol. 3 No. 2 (2025): Emirati Journal of Civil Engineering and Applications
- Fayyaz Ullah, Hamad Khan, Sohail Akhtar, Irfan Jamil, Yazeed A. Alsharedah, Comprehensive Analysis of Combined Pile Raft Foundation using PLAXIS 3D, SAP 2000, and ELPLA , Emirati Journal of Civil Engineering and Applications: Vol. 3 No. 2 (2025): Emirati Journal of Civil Engineering and Applications
- Fayiz Amin , Yasir Zaman, Abdul Wahid Anwar , Muhammad Asif , Khan Abdul Majid , Niazi Ehsanullah, Hafiz Ahmed Waqas, A Comparative Analysis of Thin-Walled Sections Using Finite Element Modelling , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 2 (2024): Emirati Journal of Civil Engineering and Applications
- Ghanim Kashwani, Alex Bell, Evaluation of the Circular Economy Potential in Improving Sustainability in the Construction Industry in the UAE , Emirati Journal of Civil Engineering and Applications: Vol. 1 No. 1 (2023): Emirati Journal of Civil Engineering and Applications
