Emirati Journal of Civil Engineering and Applications

Browse Journals

Articles

Vol. 2 No. 2 (2024): Emirati Journal of Civil Engineering and Applications

Building Information Modeling (BIM) for Energy Optimization in Green Buildings: A Case Study of a Residential Villa in the UAE

  • Adil K. Tamimi
  • Ghanim Kashwani
  • Amr Hamam
  • Ismail Abu AlHaj
  • Yousef Himeidi
  • Bilal Ramadan
Submitted
November 27, 2024
Published
2024-11-27

Abstract

This paper explores the application of Building Information Modeling (BIM) in evaluating and optimizing energy efficiency in green buildings, focusing on a residential villa in Sharjah, UAE. The study assesses thermal bridges, energy consumption, and the potential energy savings from applying insulation. The villa’s energy performance was modeled using Revit and IES-VE software, and actual energy consumption was measured for comparison. The results show that applying insulation could reduce the villa's energy consumption by up to 17.91 MWh annually, confirming the accuracy of BIM in simulating energy performance. Additionally, this paper discusses how improvements in insulation and thermal management can significantly reduce the energy demands of residential buildings in hot climates.

References

  1. Azhar, S., Carlton, W. A., Olsen, D., & Ahmad, I. (2011). Building information modeling for sustainable design and LEED® rating analysis. Automation in Construction, 20(2), 217-224. https://doi.org/10.1016/j.autcon.2010.09.019
  2. Alyami, S. H., & Rezgui, Y. (2012). Sustainable building design: A review of BIM-based approaches. Automation in Construction, 23, 17-29. https://doi.org/10.1016/j.autcon.2011.12.006
  3. Ficco, G., Iannetta, F., d’Ambrosio Alfano, F., & Dell’Isola, M. (2015). U-value in situ measurement for energy diagnosis of existing buildings. Energy and Buildings, 104, 108-121. https://doi.org/10.1016/j.enbuild.2015.06.071
  4. Jiménez, M., Porcar, B., & Heras, M. R. (2009). Application of different dynamic analysis approaches to the estimation of the building component U value. Building and Environment, 44(2), 361-367. https://doi.org/10.1016/j.buildenv.2008.03.010
  5. Kamel, E., & Memari, A. M. (2019). Review of BIM's application in energy simulation: Tools, issues, and solutions. Automation in Construction, 97, 164-180. https://doi.org/10.1016/j.autcon.2018.11.008
  6. Elgendy, K. (2011). The role of shading devices in reducing cooling energy use in buildings. Energy and Buildings, 43(9), 2387-2395. https://doi.org/10.1016/j.enbuild.2011.05.006

Downloads

Download data is not yet available.

Similar Articles

11-20 of 24

You may also start an advanced similarity search for this article.