Innovating for a Greener Future: Steel Fiber Reinforcement as a Key to Low-Carbon Concrete Construction
Abstract
The construction industry in GCC experiences continuous challenges in achieving sustainability targets toward net zero emissions by 2030 in alignment with the universal sustainable development goals. Concrete structures specifically contribute to most upfront carbon dioxide emissions that resulted from the clinker production of ordinary cement which generates high amounts of carbon emissions and uses high rates of energy which is against the sustainable development initiatives to lower the energy consumption in GCC. Having concrete is weak in resisting tensile stresses, most concrete applications are reinforced with steel mesh, and the steel reinforcement has high environmental product declared values as the process of production is energy intensive. Steel fiber concrete is strongly introduced as a sustainable solution and alternative to the steel reinforcement in concrete. Its high ability to heal and control the cracks in concrete by enhancing the ductility of concrete. Considering its lower declared values of carbon emissions compared to the normal steel mesh, the steel fiber has positioned itself as a promising solution to decarbonize different applications such as residential slab on grades. Additionally, the hybrid effect of adding steel fiber with steel reinforcement as combined increases the tensile resistance of concrete lowering the required amount of basic steel reinforcement to control crack widths. Steel fiber also improves the shear resistance of concrete which significantly reduces the element thickness under high concentrations of loads giving more alternative to architectural intents , cutting cost of materials and lowering the upfront carbon emissions. This paper investigates the environmental impacts of using steel fiber in residential slab on grades presenting a case study of project (Expo the Valley) in UAE where the steel fiber Dramix® had been utilized to optimize the thickness of slab on grades and replaced the steel mesh saving significant levels of carbon dioxide emissions. The findings clearly demonstrate that steel fiber can significantly lower carbon dioxide emissions considering its effects in design optimization and its low Environmental Product Declared Values.
References
- ACI 318. (2025). Building Code Requirements for Structural Concrete.
- ACI 544. (2018). Guide for the design of steel fiber concrete.
- fib. (2010). fib Model Code for Concrete Structures.
- Eurocode 2: Design of Concrete Structures – EN 1992.A
Downloads
Similar Articles
- Ahmed Khalafallah, Noor Muntasir, Michael Gerges, Talib E. Butt, Georgios kapogiannis, SLOW ADOPTION OF BUILDING INFORMATION MODELING: COMPARING VIEWPOINTS OF DESIGNERS AND CONTRACTORS , Emirati Journal of Civil Engineering and Applications: Vol. 1 No. 1 (2023): Emirati Journal of Civil Engineering and Applications
- Seyed Amir Hossein, Adil Al Tamimi, Ghanim Kashwani, Application of JIT on Materials and Labor Management of Construction Site , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 1 (2024): Emirati Journal of Civil Engineering and Applications
- Jian-lan Zheng, Areej T. Almalkawi, Wenda Wu, Amal Th. Almalkawi, Effect of Fly Ash Replacement Content on the Autogenous Shrinkage of Self-Compacting Concrete. , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 1 (2024): Emirati Journal of Civil Engineering and Applications
- Elgaali Elgaali, Ahmed Faisal, Rashed Assad, Mohamad Abdulrahim, Abdalla Hassan, Visualizing the Impacts of Dewatering on Ground Water and Soil Quality Using GIS , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 1 (2024): Emirati Journal of Civil Engineering and Applications
- Rashma R.S.V, Jayalekshmi B.R, Shivashankar R, A critical review on the performance of column improved ground under shear and seismic loading , Emirati Journal of Civil Engineering and Applications: Vol. 3 No. 1 (2025): Emirati Journal of Civil Engineering and Applications
- Rashed Mohamed Karkain, Seema Mohamed Karkain, Mahmoud AbdulAfou Sadeq, Assessment of Heavy Metal Contamination in the Sediments and Soils in the City of Dubai based on the Geoaccumulation Index , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 1 (2024): Emirati Journal of Civil Engineering and Applications
- Saif El-Safadi, Michael Gerges, Matthew Clarke, Tala Damra, Ahmed Khalafallah, Peter Demian, Omar Selim, Marek Salamak, Georgios Kapogiannis, Maturity of BIM Implementation in the Jordanian AEC Industry , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 1 (2024): Emirati Journal of Civil Engineering and Applications
- Ahmed Hany Fellow, The potential of adopting Blockchain Technology with BIM Implementations in the Construction Industry Ecosystem , Emirati Journal of Civil Engineering and Applications: Vol. 1 No. 1 (2023): Emirati Journal of Civil Engineering and Applications
- Mohamed Wehbi, Marwan Alzaylaie, Otso Lahtinen, Reducing the effect of rising water table on the shallow foundation settlement using geopolymer resin injections , Emirati Journal of Civil Engineering and Applications: Vol. 3 No. 1 (2025): Emirati Journal of Civil Engineering and Applications
- Musab Omar, Abdelgadir Mahmoud, The fire safety framework for the buildings in the Emirate of Sharjah, UAE , Emirati Journal of Civil Engineering and Applications: Vol. 3 No. 1 (2025): Emirati Journal of Civil Engineering and Applications
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Saif El-Safadi, Michael Gerges, Matthew Clarke, Tala Damra, Ahmed Khalafallah, Peter Demian, Omar Selim, Marek Salamak, Georgios Kapogiannis, Maturity of BIM Implementation in the Jordanian AEC Industry , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 1 (2024): Emirati Journal of Civil Engineering and Applications
- Esraa Daouda, Overview of the Smart City initiatives and challenges in Middle East , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 2 (2024): Emirati Journal of Civil Engineering and Applications
- Rashed Mohamed Karkain, Seema Mohamed Karkain, Mahmoud AbdulAfou Sadeq, Assessment of Heavy Metal Contamination in the Sediments and Soils in the City of Dubai based on the Geoaccumulation Index , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 1 (2024): Emirati Journal of Civil Engineering and Applications
- Dr. Issam Ezzeddine , Integrating Socio-Cultural Dimensions into Sustainable Urban Planning: Insights from Traditional Urban Forms in the United Arab Emirates , Emirati Journal of Civil Engineering and Applications: Vol. 3 No. 1 (2025): Emirati Journal of Civil Engineering and Applications
- Musab Omar, Abdelgadir Mahmoud, The fire safety framework for the buildings in the Emirate of Sharjah, UAE , Emirati Journal of Civil Engineering and Applications: Vol. 3 No. 1 (2025): Emirati Journal of Civil Engineering and Applications
- Dr. Anf H. Ziadat, Habtemichael Habtemariam, Abdulla Rashed, Abdulrahman Alaydaroos, Mohamed Alketbi, Saeed Alali, Recycling Covid-19 Personal Face Masks Used in Concrete , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 1 (2024): Emirati Journal of Civil Engineering and Applications
- Ahmed Khalafallah, Noor Muntasir, Michael Gerges, Talib E. Butt, Georgios kapogiannis, SLOW ADOPTION OF BUILDING INFORMATION MODELING: COMPARING VIEWPOINTS OF DESIGNERS AND CONTRACTORS , Emirati Journal of Civil Engineering and Applications: Vol. 1 No. 1 (2023): Emirati Journal of Civil Engineering and Applications
- Elgaali Elgaali, Ahmed Faisal, Rashed Assad, Mohamad Abdulrahim, Abdalla Hassan, Visualizing the Impacts of Dewatering on Ground Water and Soil Quality Using GIS , Emirati Journal of Civil Engineering and Applications: Vol. 2 No. 1 (2024): Emirati Journal of Civil Engineering and Applications
- M.Z, Naser, Arash Teymori Gharah Tapeh, Haley Hostetter, Mohammad Khaled al-Bashiti, William Qin, Simple Visual Aids for Predicting Fire Response of RC Columns: Nomograms via Machine Learning , Emirati Journal of Civil Engineering and Applications: Vol. 1 No. 1 (2023): Emirati Journal of Civil Engineering and Applications
- Ahmed Hany Fellow, The potential of adopting Blockchain Technology with BIM Implementations in the Construction Industry Ecosystem , Emirati Journal of Civil Engineering and Applications: Vol. 1 No. 1 (2023): Emirati Journal of Civil Engineering and Applications
